SOP on operation and cleaning of Hot Plate

Rahul Kashyap

This SOP describes the procedure for operation and cleaning of Hot Plate.
Ensure that the equipment is clean and free from dust.
Connect the main cord with the main supply.
Main on the toggle switch.
The red light provided on the front of the plate will glow.
Adjust the desired temperature with the help of sunvic energy regulator, thus the red/green light will glow.
On attaining the desired temperature, the green light will automatically be switched off.
Handle the equipment properly.
Any type of solvent & chemicals should not retain near the hot plate.
Clean the equipment with dry cloth to remove the dust before and after use.
To ensure that equipment should be cool at the time of cleaning

Post a Comment

Post a Comment (0)